Wireless Cat Water Fountain 3.2L Rechargeable Battery with Motion Sensor Filter and Stainless Steel Bowl

No outlet. No cord running across the floor. Just fresh, circulating water wherever your cat prefers to drink.

The Wourant 3.2L Wireless Cat Water Fountain runs on a built-in rechargeable battery, so you can place it anywhere in your home — near a window, in a hallway, on a balcony — without worrying about proximity to a power socket. The motion sensor activates the pump when your cat approaches, which conserves battery between uses and keeps the water moving when it actually matters.

When the battery needs recharging, a simple USB-C connection brings it back up. The stainless steel bowl sits at the base, keeping water contact surfaces metal and odor-free.

── What's in the Box ──────────────────────────────

• 1 × Wourant 3.2L Wireless Cat Water Fountain
• 1 × Multi-stage carbon filter (pre-installed)
• 1 × Quiet submersible pump
• 1 × USB-C charging cable
• 1 × Cleaning brush
• 1 × User manual

── Features ────────────────────────────────────────

Rechargeable Battery — No Cord Required The built-in rechargeable battery lets you place the fountain anywhere without needing a nearby outlet. Battery life depends on how often your cat triggers the motion sensor — most owners find it lasts several days to a week on a full charge with normal use. Recharging takes a few hours via the included USB-C cable.

Motion Sensor Activation When your cat comes within range of the sensor, the pump starts and water begins flowing. When your cat moves away, the pump pauses after a short delay. This keeps the water moving at the moments your cat is actually drinking, and extends battery life between charges.

LCD Display The display shows current battery level and operating mode at a glance, so you know when a recharge is needed before the fountain runs dry.

Stainless Steel Bowl The water bowl is made from rust-resistant, corrosion-resistant metal — BPA-free and free of the plastic odor that can put cats off drinking. The bowl is the only surface your cat's water touches directly, keeping their drinking experience clean and neutral-tasting.

3.2L Capacity At 3.2 liters (about 108oz), the reservoir holds enough for most single-cat households to go several days without refilling. Combined with the motion sensor conservation, this makes the fountain a genuinely low-maintenance setup for daily use.

Multi-Stage Filtration Water passes through a carbon-based filter that reduces sediment, odors, and impurities from tap water before your cat drinks it. The filter keeps the water tasting neutral and the bowl cleaner between washes.

Quiet Operation The pump runs quietly enough that most cats don't react to the sound when the sensor activates. The intermittent activation also means the fountain is silent during the longer periods between drinking sessions.

Indoor and Outdoor Use Because there's no cord, the fountain works well outdoors on a patio or balcony, or in any room where running a cable would be impractical. Note: it is not rated for use in rain or wet conditions — keep it sheltered if used outside.

── Specifications ──────────────────────────────────

Capacity: 3.2L / 108oz Bowl material: Rust-resistant, corrosion-resistant metal, BPA-free Housing material: BPA-free plastic Battery: Built-in rechargeable battery (4000mAh) Charging: USB-C cable (included) Display: LCD — shows battery level and operating mode Sensor: Motion-activated pump Operating modes: Motion sensor mode / Continuous flow mode Filter type: Multi-stage carbon filter Input voltage: 100–240V compatible (charges via USB-C) Suitable for: Cats and small dogs

── Battery and Charging Guide ──────────────────────

Expected battery life: In motion sensor mode, battery life varies depending on how frequently your cat triggers the pump. With one or two cats and typical daily drinking behavior, most users see 5–10 days per charge. Continuous flow mode uses battery faster.

How to recharge: Plug the included USB-C cable into the charging port on the base. A full recharge from low battery typically takes 2–4 hours. The LCD display shows charging status and current battery level.

When to recharge: Recharge when the LCD shows a low battery indicator — don't wait until the pump stops mid-session. We recommend plugging it in overnight every few days as part of your cleaning routine.

── Filter Replacement Guide ────────────────────────

Replace the filter every 3–4 weeks under normal use. In motion sensor mode (intermittent flow), filters may last slightly longer — up to 6 weeks.

Signs it's time to replace: water looks cloudy, develops a faint odor, or your cat starts drinking less from the fountain. Replacement filters are available separately in our store.

── Good to Know Before You Order ───────────────────

• Battery life is affected by how active your cat is near the fountain. A single cat using it several times a day will see different results from a multi-cat household. The LCD display takes the guesswork out — check it every few days.
• The fountain is designed for indoor and sheltered outdoor use. Do not submerge the base unit or use in heavy rain.
• The motion sensor works best when the fountain is placed at your cat's drinking height on a flat, stable surface.
• Some cats take 2–5 days to adjust to a new fountain. Placing it next to their current water bowl during the transition helps them get comfortable with the sound and movement.
• The stainless steel bowl is hand-wash and dishwasher-safe. The plastic housing and pump base should be hand-washed only.
• This fountain is designed for cats. It can be used for small dogs, but the bowl height and sensor positioning are optimized for cats.